In-vitro polymicrobial oral biofilm model represents clinical microbial profile and disease progression during implant-related infections.

AIM: Clinically relevant in-vitro biofilm models are essential and valuable tools for mechanistically dissecting the etiopathogenesis of infectious diseases and test new antimicrobial therapies. Thus, the aim of this study was to develop and test a clinically relevant in-vitro oral polymicrobial biofilm model that mimics implant-related infections in terms of microbial profile. METHODS AND RESULTS: For this purpose, 24-well plate system was used to model oral biofilms, using three different microbial inoculums to grow in-vitro biofilms: (1) human saliva from periodontally healthy patients; (2) saliva as in inoculum 1 + Porphyromonas gingivalis strain; and (3) supra and subgingival biofilm collected from peri-implant sites of patients diagnosed with peri-implantitis. Biofilms were grown to represent the dynamic transition from an aerobic to anaerobic community profile. Subsequently, biofilms were collected after each phase and evaluated for microbiological composition, microbial counts, biofilm biomass, structure, and susceptibility to chlorhexidine (CHX). Results showed higher live cell count (P < .05) for biofilms developed from patients' biofilm inoculum, but biomass volume, dry weight, and microbiological composition were similar among groups (P > .05). Interestingly, according to the checkerboard DNA-DNA hybridization results, the biofilm developed from stimulated human saliva exhibited a microbial composition more similar to the clinical subgingival biofilm of patients with peri-implantitis, with proportions of the main pathogens closer to those found in the disease. In addition, biofilm developed using saliva as inoculum was shown to be susceptible to CHX with significant reduction in bacteria compared with biofilms without exposure to CHX (P < .05). CONCLUSION: The findings suggested that the in-vitro polymicrobial biofilm developed from human saliva as inoculum is a suitable model and clinically relevant tool for mimicking the microbial composition of implant-related infections.

Clinical efficacy of triclosan-containing toothpaste in peri-implant health: A systematic review and meta-analysis of randomized clinical trials.

STATEMENT OF PROBLEM: Recent evidence suggests that toothpaste containing 0.3% triclosan (TCS) is more effective than regular toothpaste in improving clinical periodontal conditions. However, a consensus on whether TCS favors a healthy peri-implant environment is limited. PURPOSE: The purpose of this systematic review and meta-analysis of randomized clinical trials was to determine the effects of TCS-containing toothpaste on dental implant health based on clinical, immunological, and microbiological parameters, as well as on reported adverse events. MATERIAL AND METHODS: Clinical studies comparing peri-implant conditions in participants by using TCS toothpaste versus conventional fluoride toothpaste (control) were extracted from 9 databases. The studies were assessed with the Cochrane risk-of-bias tool for randomized clinical trials (RoB 2). Datasets for bleeding on probing (BOP), probing depth (PD), clinical attachment level (CAL), gingival index (GI), plaque index (PI), osteo-immunoinflammatory mediators, and bacterial load were plotted, and the standard mean difference (SMD) quantitative analysis was applied by using the Rev Man 5.3 software program. Adverse effects reported by the studies were also tabulated. The certainty of evidence was assessed by using the grading of recommendations assessment, development, and evaluation approach. RESULTS: Six studies were included in the meta-analyses. BOP was higher in the control group than in the TCS toothpaste group at 3 months (SMD -0.59 [-1.11, -.07] P=.002, I2=77%) and 6 months (SMD -0.59 [-0.83, -0.34] P=.009, I2=79%). PD (SMD -0.04 [-0.08, -0.00] P=.04, I2=0%) was also deeper in the control group versus TCS toothpaste at 6 months (SMD -0.41 [-0.73, -0.10] P=.04, I2=77%). CAL, GI, and PI did not differ between groups (P>.05). Among the osteo-immunoinflammatory mediators, IL-10 levels increased, and IL-1ß and osteoprotegerin levels decreased in the TCS toothpaste group (P<.05). Microbiological findings found that TCS toothpaste prevented the growth of periodontal pathogens, specifically in up to approximately 20% of the Prevotella intermedia. Adverse effects were not reported after toothbrushing in either group. However, most studies had "some" or "high" risk of bias, and the certainty of the evidence was considered to be "very low." CONCLUSIONS: Most studies were short-term (3 and 6 months) analyses, and the results found that, although TCS-containing toothpaste had positive osteo-immunoinflammatory and microbiologic results, clinical parameters, including CAL, GI, and PI, were not influenced.

Application of polyetheretherketone (PEEK) posts: evaluation of fracture resistance and stress distribution in the root: in vitro and finite element analyses.

To evaluate the feasibility of using a milled polyetheretherketone (PEEK) post and core in endodontically treated teeth with or without a ferrule. Sixty bovine tooth roots were endodontically treated followed by cementation of intraradicular retainers (IR), according to each experimental group: a) non-ferrule glass fiber post (f0FP); b) 2-mm-ferrule glass fiber post (f2FP); c) non-ferrule resized glass fiber post (f0PR); d) 2-mm-ferrule resized glass fiber post (f2PR); e) non-ferrule PEEK post and core (f0PPC); and f) 2-mm-ferrule PEEK post and core (f2PPC). Metal crowns were made and cemented. A periodontal ligament was simulated using polyether. A force was applied to the palatine portion of each sample at 45°, until fracture. Fracture resistance data were submitted to two-way ANOVA and Tukey's test (α = 0.05). Three-dimensional digital models were developed to calculate the tensions formed in the root using finite element analysis. Models of glass fiber posts and PEEK posts and cores were evaluated with or without a ferrule. The results were analyzed by the Mohr-Coulomb criterion. The type of IR was not influenced by fracture strength (p = 0.243). There were significant statistical differences among the remaining factors. Ferrule groups had greater fracture resistance, and the failure mode of teeth with a ferrule was more catastrophic than the non-ferrule group. A ferrule increases fracture resistance and influences failure mode; the PEEK post and core did not modify the biomechanics of endodontically treated teeth, and resembled the glass fiber post results. The crack initiation point differed between the ferrule and non-ferrule groups.

Funding assistance and global productivity in the field of implant overdentures: A bibliometric analysis of 35 years.

STATEMENT OF PROBLEM: Implant overdentures have been widely used as a treatment option for edentulous patients. However, the development of implants, aside from commercial growth, requires funding assistance to determine scientific reliability and clinical applications. Nonetheless, bibliometric studies in the implant overdenture field are lacking. PURPOSE: The purpose of this bibliometric analysis was to evaluate the prevalence of funding and its bibliometric associated parameters according to the financial assistance granted and the implant overdenture documentation over time. MATERIAL AND METHODS: Six databases were assessed, and 12 bibliometric parameters related to the economy, geographical origin, publication details, and corresponding author metrics were recorded. An incidence rate ratio was applied by using a multiple Poisson regression model (α=.05) to assess the association between funding and each bibliometric parameter. RESULTS: In total, 1369 studies published between 1986 and 2021 were assessed bibliometrically. The prevalence of funded studies was 34.8% (n=477). The parameter associated with the presence of funding was country income (P<.01), with those having a high and upper-middle income being more funded than those with a lower-middle and low income. Oceania and South America were the continents more frequently funded (P<.05), with Africa being the least frequent. Randomized and nonrandomized controlled trials, in vitro studies, and in silico studies were more funded (P<.001) than case reports and series. Stud and ball attachment systems were more funded (P<.01) than studies with more than 1 retention system. Funding increased over time (P<.01), and corresponding authors with a higher h-index had more studies funded (P<.05). CONCLUSIONS: The number of funded studies on implant overdentures increased over the years. Other bibliometric parameters such as country income, continent, study design, retention system, and corresponding author h-index were associated with the frequency of funded studies published.

Factors and clinical outcomes for standard and mini-implants retaining mandibular overdentures: A systematic review and meta-analysis.

STATEMENT OF PROBLEM: Standard-diameter dental implants are not always applicable because of anatomic limitations of the residual ridge. Thus, mini-implants have been increasingly used and offer an alternative. However, data regarding prosthetic complications, maintenance factors, and clinical outcomes are limited. PURPOSE: The purpose of this systematic review and meta-analysis was to compare prosthetic complications and maintenance events and clinical outcomes in residual ridges rehabilitated with mandibular implant overdentures (IODs) by using standard implants or mini-implants. MATERIAL AND METHODS: Nine electronic databases were searched. Quantitative analyses to measure the risk ratio (RR) and standardized mean difference (SMD) were applied. Those methods were used to assess prosthetic complications and maintenance events (abutment adjustments, replacement of retentive element, occlusal adjustment, and overdenture fracture) and clinical outcomes related to postoperative pain, probing depth (PD), plaque index (PI), marginal bone loss (MBL), and implant survival rate. RESULTS: Altogether, 7 publications were selected. Mini-implants presented reduced abutment adjustments (RR 0.23 [0.07, 0.73], P=.01), replacement of retentive element (RR 0.41 [0.31, 0.54], P<.001), occlusal adjustment (RR 0.53 [0.31, 0.91], P=.02), and overdenture fracture (RR 0.46 [0.23, 0.94], P=.03) compared with standard implants. Additionally, mini-implants presented lower values for PI at 6 months (SMD -0.27 [-0.47, -0.08], P=.006) and 12 months (SMD -0.25 [-0.46, -0.05], P=.01). No additional tangible differences were noted. CONCLUSIONS: Mini-implants might be an alternative choice based on the number of prosthetic complications and maintenance events. This was also confirmed by the comparable clinical data between standard implants and mini-implants.

Microbiological effects of amoxicillin plus metronidazole in the treatment of young patients with Stages III and IV periodontitis: A secondary analysis from a 1-year double-blinded placebo-controlled randomized clinical trial.

BACKGROUND: Despite the body of evidence supporting the clinical benefits of metronidazole (MTZ) and amoxicillin (AMX) in the treatment of young patients with periodontitis, the microbiological outcomes of this antibiotic protocol have been less explored. This study evaluated the microbiological effects of adjunctive MTZ+AMX in the treatment of young patients with periodontitis. METHODS: Subjects with periodontitis Stages III or IV and ≤30 years old were randomly allocated to receive scaling and root planing (SRP) with placebo (n = 15) or with MTZ (400 mg) and AMX (500 mg) three times a day for 14 days (n = 15). Nine subgingival biofilm samples per subject (three samples from each probing depth (PD) category: ≤3, 4-6, and ≥7 mm) were collected at baseline and 3-, 6-, and 12-months post-treatment and individually analyzed for 40 bacterial species by checkerboard DNA-DNA hybridization. RESULTS: Thirty subjects (15/group) with mean ages 27.6 ± 3.5 (control) and 26.8 ± 3.9 (test) were included. At 12 months post-therapy, the antibiotic group harbored lower proportions of red complex (1.3%) than the placebo group (12.5%) (p < 0.05). SRP + MTZ+AMX was more effective than mechanical treatment in reducing levels/proportions of several pathogens and increasing proportions of Actinomyces species (p < 0.05). Levels/proportions of Aggregatibacter actinomycetemcomitans were only reduced in the antibiotic group (p < 0.05). This group also exhibited greater reduction in the number of sites with PD ≥5 mm and higher percentage of subjects reaching the clinical end point for treatment (≤4 sites with PD ≥5 mm) than the control group (p < 0.05). CONCLUSION: SRP+MTZ+AMX allowed for establishing a long-term healthier subgingival biofilm community and periodontal clinical condition, than SRP only.

Antimicrobial behavior of titanium coating with chlorhexidine-doped thin film exposed to a biofilm supplemented with nicotine.

Because nicotine upregulates the growth of most oral bacteria, this in vitro study investigated the antimicrobial effect of chlorhexidine-doped thin film on commercially pure titanium against Fusobacterium nucleatum (F. nucleatum) biofilm supplemented with different concentrations of nicotine (0, 1, and 2 mg/mL). Biofilms were formed on a chlorhexidine-doped thin film on commercially-pure-titanium discs and compared to the control groups. Biofilm viability, total biofilm growth using a spectrophotometer, extracellular polysaccharide content, and pH variations were assessed as dependent variables. Data were submitted to ANOVA and Tukey honest significant difference tests (α=0.05). F. nucleatum biofilm growth was inhibited when exposed to chlorhexidine-doped thin film (p<0.05). Biofilm supplemented with nicotine did not impact the synthesis of EPS on the same type of treatment (p>0.05). The pH values were significantly increased with the increase of nicotine concentration (p<0.05). Chlorhexidine-doped thin film was effective in reducing F. nucleatum biofilm supplemented with nicotine.

Application of polyetheretherketone (PEEK) posts: evaluation of fracture resistance and stress distribution in the root: in vitro and finite element analyses

Abstract To evaluate the feasibility of using a milled polyetheretherketone (PEEK) post and core in endodontically treated teeth with or without a ferrule. Sixty bovine tooth roots were endodontically treated followed by cementation of intraradicular retainers (IR), according to each experimental group: a) non-ferrule glass fiber post (f0FP); b) 2-mm-ferrule glass fiber post (f2FP); c) non-ferrule resized glass fiber post (f0PR); d) 2-mm-ferrule resized glass fiber post (f2PR); e) non-ferrule PEEK post and core (f0PPC); and f) 2-mm-ferrule PEEK post and core (f2PPC). Metal crowns were made and cemented. A periodontal ligament was simulated using polyether. A force was applied to the palatine portion of each sample at 45°, until fracture. Fracture resistance data were submitted to two-way ANOVA and Tukey's test (α = 0.05). Three-dimensional digital models were developed to calculate the tensions formed in the root using finite element analysis. Models of glass fiber posts and PEEK posts and cores were evaluated with or without a ferrule. The results were analyzed by the Mohr-Coulomb criterion. The type of IR was not influenced by fracture strength (p = 0.243). There were significant statistical differences among the remaining factors. Ferrule groups had greater fracture resistance, and the failure mode of teeth with a ferrule was more catastrophic than the non-ferrule group. A ferrule increases fracture resistance and influences failure mode; the PEEK post and core did not modify the biomechanics of endodontically treated teeth, and resembled the glass fiber post results. The crack initiation point differed between the ferrule and non-ferrule groups.

Nicotine is a potent extracellular polysaccharide inducer in Fusobacterium nucleatum biofilms

The purpose of this in vitro study was to analyze the influence of nicotine on the extracellular polysaccharides in Fusobacterium nucleatum biofilm. Methods: F. nucleatum (ATCC 10953) biofilms supplemented with different concentrations of nicotine (0, 0.5, 1, 2, 4, and 8 mg/mL) were grown in two different BHI broth conditions [no sucrose and 1% sucrose]. Extracellular polysaccharides assay, pH measurements, and a spectrophotometric assay were performed. Data were submitted for ANOVA and Tukey honestly significant difference analyses (HSD) tests (α =.05). Results: Extracellular polysaccharides synthesis was influenced by an interaction between nicotine concentrations and growth medium solution containing sucrose (P<.05). The pH values declined in the sucrose-exposed biofilm were greater than in the group exposed only to nicotine (P<.05). The biofilm exposed to sucrose and nicotine had a higher total biofilm growth (P<.05) than the nicotine-treated biofilm without sucrose. Conclusions: Regardless of sucrose exposure, biofilms exposed to different nicotine concentrations influenced the amount of extracellular polysaccharides

Oral Microorganisms and Biofilms: New Insights to Defeat the Main Etiologic Factor of Oral Diseases.

The oral cavity presents a highly diverse community of microorganisms due to the unique environmental conditions for microbial adhesion and growth [...].

Bibliometric assessment in implant-retained overdenture articles: Mapping citation and journal impact factor trends.

STATEMENT OF PROBLEM: Implant-retained overdentures are a recognized treatment option. However, a comprehensive assessment of all articles on implant-retained overdentures to identify publication standards such as mean citation and the Journal Citation Reports (JCR) impact factor is lacking. PURPOSE: The purpose of this bibliometric assessment was to evaluate the association of mean citation and JCR impact factor with bibliometric parameters in articles on implant-retained overdentures. MATERIAL AND METHODS: Articles reporting randomized controlled clinical trials (RCTs) and nonrandomized controlled clinical trials (N-RCTs); case reports and series; retrospective studies; and in silico, in vitro, or systematic reviews in 6 databases were included. Data were extracted, and 2 multiple Poisson regressions analyses were applied (α=.05). The dependent variables were mean citation and JCR impact factor, which were evaluated to identify their association with bibliometric parameters by using prevalence ratio (PR) values. RESULTS: A total of 1369 articles published from 1986 to 2021 were included. The data revealed a high mean citation and high JCR impact factor for RCT, N-RCT, retrospective, and in vitro studies (P<.05). In silico studies presented a high mean citation (P<.001). Senior researchers with a high h-index were more likely to have a high mean citation and publications with a high JCR impact factor (P<.001). Also, senior authors associated with an international network were more likely to have a high mean citation (P=.001). High-income countries had more studies with a high mean citation and JCR impact factor (P<.05). Higher JCR impact factors were associated with articles evaluating only the maxilla or mandible (P<.05). The topics "implant setting" and "macrodesign" were associated with a high mean citation (P<.05). CONCLUSIONS: The publication trends suggest a high mean citation and a high JCR impact factor for clinical designs (RCT, N-RCT, retrospective) and in vitro studies. The same pattern was also displayed for researchers with a high h-index and located in high-income countries.

Impact of CAD-CAM materials and bonding protocol on the bond strength between denture base/artificial teeth: a systematic review and meta-analysis.

PURPOSE: To identify the most effective bonding protocol between the denture base and artificial teeth made with different CAD/CAM materials (milled and 3D printed) compared to conventional heat-cured materials. MATERIALS AND METHODS: This review was performed according to the Preferred Reporting Items for Systematic and Meta-Analysis (PRISMA) criteria and registered in PROSPERO (CRD42021276084). An electronic search was performed independently by two examiners in the MEDLINE/PubMed, Cochrane Library, Scopus, Web of Science, ProQuest, and OpenGrey databases for articles published up to and including December 2021. RESULTS: The electronic search returned 806 articles, and after duplicates were removed, the total was 589 articles. Four articles were selected according to the eligibility criteria. Evaluating the different combinations of denture base materials and artificial teeth, the IvoBase CAD Bond (Ivoclar Vivadent) was effective for bonding the CAD/CAM denture bases to prefabricated acrylic resin denture artificial teeth. There were no differences compared to heat-cured denture base bonding to prefabricated acrylic resin denture artificial teeth (χ2: 68.56; I2: 96%; P < .001). CONCLUSION: IvoBase CAD Bond as a bonding system can be an alternative for using new technologies in the fabrication of α CAD/CAM base with prefabricated acrylic resin denture artificial teeth.

Analysis of salivary parameters of mucopolysaccharidosis individuals.

Mucopolysaccharidosis (MPS) is a heterogeneous group of rare, chronic, progressive and systemic inherited disorders resulting from deficiency or lack of lysosomal enzymes responsible for the degradation of glycosaminoglycans. Products of nitrosative stress have been previously detected in blood and urine samples of patients with MPS. However, it is unclear whether they are present in the saliva of MPS patients and also if they correlate with salivary parameters such as flow and pH. This study compared the salivary levels of NOX (NO2- + NO3-), nitrite (NO2-), protein (albumin), erythrocyte and leukocyte numbers, as well as the salivary flow rate and pH values of samples obtained from 10 MPS patients and 10 healthy subjects. MPS patients exhibited higher salivary levels of NOX and NO2- when compared to healthy subjects (p < 0.05). Albumin was only detected in six saliva samples of MPS patients and, erythrocytes and leukocytes were detected in 60% and 40% of the MPS patients, respectively. In addition, salivary flow rate and pH averages were statistically lower in this group when compared to healthy samples (p < 0.05). Overall, the data indicates that the salivary levels of NO products can be used in combination with other heath indicators to monitor MPS disorders.

Patient-reported outcome measures and clinical assessment of implant-supported overdentures and fixed prostheses in mandibular edentulous patients: A systematic review and meta-analysis.

STATEMENT OF PROBLEM: A consensus based on patients' perceptions as to whether to use overdentures or fixed prostheses to rehabilitate mandibular edentulous arches is limited. PURPOSE: The purpose of this systematic review and meta-analysis was to compare the patient-reported outcome measures (PROMs) and clinical outcomes associated with implant-supported overdentures and fixed prostheses in edentulous mandibles. MATERIAL AND METHODS: Nine electronic databases were searched for randomized clinical trials (RCTs) and nonrandomized clinical trials (N-RCTs). The risk of bias was assessed by the revised Cochrane risk of bias tool for RCTs (RoB 2) and N-RCT (ROBINS-I). Data sets for oral health-related quality of life (OHRQoL), satisfaction, survival rate, implant probing depth, and marginal bone loss were plotted, and the appropriate analyses were applied by using the Rev Man 5.3 software program. Certainty of evidence was also evaluated by means of the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) approach. RESULTS: Ten eligible trials were included and evaluated quantitatively. For 3 domains of OHRQoL, fixed prostheses showed significantly higher quality of life when compared with overdentures regarding functional limitation (P<.001), physical disability (P=.001), and physical pain (P=.003). Fixed prostheses also improved satisfaction, when compared with overdentures for comfort (P=.02), ease of mastication (P<.001), retention (P<.001), and stability (P<.001). The same pattern was observed for overall OHRQoL (P=.01) and satisfaction (P=.01) in which fixed prostheses improved patient satisfaction. Only ease of cleaning presented greater satisfaction for the overdenture group. Clinical parameters did not differ statistically (P>.05) between both types of prosthesis. CONCLUSIONS: Fixed rehabilitations for mandibular edentulous patients seem to be a well-accepted treatment from the patients' oral health perspective. However, mandibular overdentures are no less efficient than fixed prostheses in terms of clinical outcomes.

Analysis of salivary parameters of mucopolysaccharidosis individuals

Abstract Mucopolysaccharidosis (MPS) is a heterogeneous group of rare, chronic, progressive and systemic inherited disorders resulting from deficiency or lack of lysosomal enzymes responsible for the degradation of glycosaminoglycans. Products of nitrosative stress have been previously detected in blood and urine samples of patients with MPS. However, it is unclear whether they are present in the saliva of MPS patients and also if they correlate with salivary parameters such as flow and pH. This study compared the salivary levels of NOX (NO2- + NO3-), nitrite (NO2-), protein (albumin), erythrocyte and leukocyte numbers, as well as the salivary flow rate and pH values of samples obtained from 10 MPS patients and 10 healthy subjects. MPS patients exhibited higher salivary levels of NOX and NO2- when compared to healthy subjects (p < 0.05). Albumin was only detected in six saliva samples of MPS patients and, erythrocytes and leukocytes were detected in 60% and 40% of the MPS patients, respectively. In addition, salivary flow rate and pH averages were statistically lower in this group when compared to healthy samples (p < 0.05). Overall, the data indicates that the salivary levels of NO products can be used in combination with other heath indicators to monitor MPS disorders.

Dental displacement in complete dentures influenced by different flask types and polymerization cycles.

This study evaluated the dental displacement in dentures included in different flasks and processed by the Australian cycle modified or by microwave. Metal pins were placed on the teeth as reference for measurements: a) Incisal edge of maxillary and mandibular central incisors, buccal cusp of maxillary and mandibular vestibular first premolars, and mesiobuccal maxillary and mandibular cusps of second molars; b) Incisor to incisor, premolar to premolar and molar to molar; c) Left incisor to left molar and right incisor to right molar, and d) Vertical. Dentures were divided according to flasks (n=10): G1- Metal; G2- HH bimaxillary metal; G3-Microwaves; G4- HH bimaxillary microwaves. For G1 and G2, polymerization at 65ºC/30 min, flame quenched for 30 min, heating at 65ºC/30 min, boiling water for 1 h. For G3 and G4, microwave (20 min/140 W and 5 min/560 W). Comparator microscope with digital camera and analytical unit assessed the measurements before and after denture polymerization. The final distance was made subtracting the distance before the denture processing from the distance of the dental displacement after processing. The value of the difference was submitted to 2-way ANOVA, considering the flask type and denture type. Maxillary denture showed greater displacement when compared to mandibular denture. Flask types and interaction with denture types showed similar difference between before and after polymerization. In conclusion, displacement promoted by flask types in dentures cured by polymerization cycles promoted similar effect on the distance between teeth. Greater value for distance between teeth occurred for maxillary denture.

Clinical efficacy of anodized dental implants for implant-supported prostheses after different loading protocols: A systematic review and meta-analysis.

OBJECTIVES: To summarize the clinical performance of anodized implants connected to different prostheses design after immediate/early (IL) or conventional loading (CL) protocols. MATERIALS AND METHODS: Seven databases were surveyed for randomized (RCTs) and non-randomized controlled clinical trials (CCTs). Studies comparing IL vs. CL protocol of anodized implants supporting single crown, fixed partial denture (FPD), full-arch fixed dental prosthesis (FDP), or overdenture were included. Risk-of-bias was evaluated using Cochrane Collaboration tools. Meta-analyses for different follow-up were analyzed, followed by heterogeneity source assessment and GRADE approach. The outcomes included implant survival rate, marginal bone loss (MBL), implant stability quotient (ISQ), probing depth (PD), plaque index (PI), and peri-implantitis prevalence. RESULTS: From 24 eligible studies, 22 were included for quantitative evaluation. Most RCTs (58%, n = 11) and all the 5 CCTs had high and serious risk-of-bias, respectively. Overall, pooling all prosthesis design, no difference between IL vs. CL protocols was observed for all outcomes (p > .05). However, according to prosthesis type subgroups, CL reduced MBL for full-arch FDP (p < .05). In a point-in-time assessment, with overdenture, although IL presented higher PI (12 months), it showed lower MBL (≥24 months), higher ISQ (3 months), and lower PD (6 and 12 months) (p < .05). Conversely, PD was higher for IL in single crown (3 and 6 months) (p < .05). Regarding MBL, IL demonstrated higher mean difference for full-arch FDP (36 months) and FPD (12 and 36 months) (p < .05). CONCLUSION: Within the limitations of this study, overall, there is no significant difference in the outcomes between IL and CL loading protocols.

Peri-implant and esthetic outcomes of cemented and screw-retained crowns using zirconia abutments in single implant-supported restorations-A systematic review and meta-analysis.

OBJECTIVES: To evaluate the peri-implant tissue changes and esthetic outcomes of cemented and screw-retained crowns of single-tooth implants in the esthetic zone using zirconia abutments. MATERIAL AND METHODS: An electronic search was performed on nine databases. The risk-of-bias was assessed by the revised Cochrane risk-of-bias tool for randomized (RoB 2) and non-randomized (ROBINS-I) clinical trials. Marginal bone level change, soft tissue thickness, bleeding on probing, probing depth, survival rates of implants and crowns, complications, plaque and papilla indexes, and pink esthetic score data were extracted and analyzed. The certainty of evidence was accessed through the GRADE approach. RESULTS: Nine records were included and 7 were used in the meta-analyses. Screw-retained crowns presented greater marginal bone level change (MD -0.04 [-0.08, -0.00] p = 0.04, I2  = 0%) compared to cemented crowns up to 1-year. At 3 and 4 years no significant differences (p > 0.05) were observed. Soft tissue thickness did not differ between groups (p > 0.05). The bleeding on probing was higher in cemented group than in screw-retained crowns at 1-year (MD 0.17 [0.08, 0.27] p = 0.0005, I2  = 0%), at medium-term periods (3 and 4 years) no statistically significant differences (p > 0.05) were observed for this outcome. Probing depth, survival rates of implants and crowns, complications, and plaque index, as well as esthetic analysis using the papilla index and pink esthetic score did not differ statistically (p > 0.05) between both retention systems at short and medium-term periods. CONCLUSION: The connection system considering zirconia abutments presented no influence on peri-implant parameters and esthetics evaluation for medium-term periods (3 and 4 years).

Dental displacement in complete dentures influenced by different flask types and polymerization cycles

Abstract This study evaluated the dental displacement in dentures included in different flasks and processed by the Australian cycle modified or by microwave. Metal pins were placed on the teeth as reference for measurements: a) Incisal edge of maxillary and mandibular central incisors, buccal cusp of maxillary and mandibular vestibular first premolars, and mesiobuccal maxillary and mandibular cusps of second molars; b) Incisor to incisor, premolar to premolar and molar to molar; c) Left incisor to left molar and right incisor to right molar, and d) Vertical. Dentures were divided according to flasks (n=10): G1- Metal; G2- HH bimaxillary metal; G3-Microwaves; G4- HH bimaxillary microwaves. For G1 and G2, polymerization at 65ºC/30 min, flame quenched for 30 min, heating at 65ºC/30 min, boiling water for 1 h. For G3 and G4, microwave (20 min/140 W and 5 min/560 W). Comparator microscope with digital camera and analytical unit assessed the measurements before and after denture polymerization. The final distance was made subtracting the distance before the denture processing from the distance of the dental displacement after processing. The value of the difference was submitted to 2-way ANOVA, considering the flask type and denture type. Maxillary denture showed greater displacement when compared to mandibular denture. Flask types and interaction with denture types showed similar difference between before and after polymerization. In conclusion, displacement promoted by flask types in dentures cured by polymerization cycles promoted similar effect on the distance between teeth. Greater value for distance between teeth occurred for maxillary denture.

Resumo O objetivo neste estudo foi avaliar o deslocamento dental em próteses totais incluídas em diferentes tipos de muflas e polimerizadas pelo ciclo australiano ou por micro ondas. Pinos metálicos foram colocados nos dentes como pontos de referência para as medidas: a) Borda incisal dos incisivos centrais maxilares e mandibulares, cúspide vestibular dos primeiros pré molares maxilares e mandibulares e cúspides mésiovestibulares dos segundos molares maxilares e mandibulares; b) Distâncias látero-laterais incisivo a incisivo, pré-molar a pré-molar e molar a molar; c) Distâncias horizontais anteroposterior incisivo esquerdo a molar esquerdo e incisivo direito a molar direito, e d) Vertical. As próteses foram separadas de acordo com o tipo de mufla (n=20): G1- Metálica; G2-HH bi-maxilar metálica; G3- Micro-ondas; G4- HH bi-maxilar micro ondas. Ciclo de polimerização para G1 e G2, água a 65ºC por 30 minutos, aquecimento interrompido por 30 minutos, reaquecimento a 65ºC por 30 minutos, seguido de água fervente por 1 hora. Para G3 e G4, micro ondas (20 minutos a 140 W e 5 minutos a 560 W). As medidas foram avaliadas com microscópio comparador linear. A distância final entre os dentes foi obtida subtraindo o valor da distância antes do processamento da prótese do valor da distância resultante do deslocamento dentário após o processamento. A diferença obtida entre essas distâncias foi submetida à ANOVA de 2 fatores, considerando como variáveis tipo de mufla e tipo de prótese. A prótese maxilar apresentou maior deslocamento dental quando comparada à mandibular. Os tipos de muflas e a interação com os tipos de próteses mostraram movimentos dentais similares antes e depois da polimerização. Em conclusão, o deslocamento dental promovido por diferentes tipos de frascos em próteses curadas por diferentes ciclos de polimerização promoveu efeito semelhante na alteração da distância entre os dentes. Maior valor para a mudança de distância entre os dentes ocorreu na prótese maxilar.

Targeting implant-associated infections: titanium surface loaded with antimicrobial.

Implant devices have = proven a successful treatment modality in reconstructive surgeries. However, increasing rates of peri-implant diseases demand further examination of their pathogenesis. Polymicrobial biofilm formation on titanium surfaces has been considered the main risk factor for inflammatory processes on tissues surrounding implant devices, which often lead to implant failure. To overcome microbial accumulation on titanium surfaces biofilm targeting strategies have been developed to modify the surface and incorporate antimicrobial coatings. Because antibiotics are widely used to treat polymicrobial infections, these agents have recently started to be incorporated on titanium surface. This review discusses the biofilm formation on titanium dental implants and key factors to be considered in therapeutic and preventative strategies. Moreover, a systematic review was conducted on coatings developed for titanium surfaces using different antibiotics. This review will also shed light on potential alternative strategies aiming to reduce microbial loads and control polymicrobial infection on implanted devices.